Shofu Beauticem SA Resin Cement

Features

Durable bond to a range of substrates
Features one of the highest levels of translucency for demanding aesthetic cases
Maximum resin polymerization imparts superior mechanical properties, higher resistance to staining and low solubility
Optimal viscosity for ease of handling and extremely thin bonding layer (11.8 µ) provides invisible margins
Virtually no post-operative sensitivity for better patient comfort
Effective release of fluoride provides sustained anti-cariogenic and anti-bacterial properties
Self-etching, self-adhesive resin cement
No primer required for all substrates (except porcelain)
Dual cure for easy cleanup
High Radiopacity
Low film thickness (12μm)

Description

A self-etch, self-adhesive dual cure resin cement that guarantees a simple, fasr and reliable adhesion to a variety of substrates ranging from metal, indirect resins and ceramics, without any hassle of post-operative sensitivity.

Designed for cementation of: all-ceramic restorations; prostheses fabricated with precious, semi-precious, non-precious alloys including titanium; porcelain fused to metal restorations; indirect resin restorations; all-ceramic, resin and metal restorations to implant abutment; metal and resin post & core restorations

INDICATIONS:

Used when fabricating and repairing resin veneered restorations
Used when repairing porcelain fused to metal restorations
Used when fabricating and repairing chrome cobalt dentures or metal attachments
Used for bonding / repairing metal restorations (inlays, onlays, crowns and bridges), metal splints, metal posts and cores with dental adhesive resin or bonding / filling material

Specifications

COMPOSITION:

Acetone
Phosphonic acid monomer
Thioctic acid monomer

1 x 9ml PasteBeauticem SA (Hand-Mix) Type
1 x Mixing Pad & Spatula

Directions For Use

1. Pretreatment of the restoration surface

1-1. Extraoral use Sandblast the adhesive metal surface with 50-100 μm aluminum oxide at approx. 0.3-0.5 MPa / 3-5 bar. Then, perform ultrasonic cleaning and dry with clean air. Sandblast can be replaced by roughing the surface with a suitable abrasive (eg. diamond bur etc)

1-2. Intraoral use Place rubber dam and avoid direct contact with oral tissue. Roughen the adhesive metal surface using a dental abrasive (eg. diamond bur etc), rinse with water and dry with clean air

2. Application Dispense adequate amount of M.L. Primer on a dish. Apply to the entire adhesive surface in one layer with a disposable brush. Leave it undisturbed for 10 sec. and dry naturally

3. Bonding to resin material Bond resin material according to the instructions for use of each product.