Directions For Use
STEP 1-
- After scraping off the hard calculus with the ultrasonic scaler then the dentist polishes the teeth.
- Dental polishing removes surface stains on teeth and leaves them shiny and smooth, putting the finishing touches on a protective dental treatment.
STEP-2
- Tooth polishing is a painless dental procedure.
- Polishing is usually carried out after scaling to remove stains and make your teeth feel smooth and shiny.
- Polishing is done with using a slow speed handpiece containing a small, soft rubber cup that spins on the tip of the smooth teeth and polishing paste.
- Septodont Detartrine is scooped up into the slow speed handpiece with the rubber cup and spun around on the teeth.
- The cup containing the solution spins on the teeth to create a shiny, smooth surface.
- Alternatively prophy jet polishing uses a pressurized spray of air and water with sodium hydrogen-carbonate powder to remove stains, plaque, and soft debris from your teeth.
- After 30 seconds of the fluoride treatment, the patient is asked to spit the remaining solution into a saliva ejector.
Some key factors which make tooth polishing more effective are as below:
- Rotations per minute of the polishing device such as rubber cup
- Pressure at which the rubber cup is applied on the tooth surface during polishing
- Coarseness of the prophylaxis paste
- Time taken for the procedure.
FAQs
1. Does it remove stains properly?
Ans – Septodont Detartrine not only polishes the teeth but also removes the dental stains, plaque, and microorganisms formed on the outer surface of the teeth.
2. Does it cause any side effects?
Ans – No , Detartrine “Z” contains Zircon powder so there is zero side effects.