Dental Avenue Avue Bond Dual

Description

Avuebond is a dual cure bonding system consisting of the two components Avuebond dual part A and avuebond dual B that are to be mixed before application (part B is an activator).

The strong adhesive of avuebond dual to etched enamel or dentine proceeds on principles similar to glass incomer cements. Good, long lasting adhesive strength and good bio-compatibility are attained by poly-carboxylic acids. Avuebnd dual dual can be used on slightly moist dentine surface (wet bonding technique).

INDICATIONS:

It is designed for for strong bonding of light cure, self & dual cure composites to etched enamel and dentine and to precious/non –precious metals.
It can also used for priming the root canals before cementation of endodontic posts with self –or dual cure composites.

CONTRAINDICATION:

Do not apply the material in cases of allergies to any of the components

1 x 5ml Part-A bond
1 x 5ml Part-B bond
Accessories

Directions For Use

STEP 1:

Apply avuebond dual part A generously with a brush onto the enamel and dentin surface for 30 seconds with agitation. The material should build a homogeneous layer.

STEP 2:

Remove excess material carefully.

STEP 3:

Dry cautiously with oil free air for about 15 seconds to remove all volatile components and to disperse the adhesive to an layer. Do no dedicate the dentine.

STEP 4:

Cure the avuebond dual part A with a suitable light curing unit for 20 seconds before application of a second’s layer of avuebond dual part A.

STEP 5:

Do not rinse off the aveubond dual part A if not used immediately, place dispensed avuebond dual part A in subdued light to prevent premature polymerization by incident light.

STEP 6:

The avuebond dual part A will not self-cure. Apply again the avuebond dual part A generously with a brush onto the adhesive surface as described above. Before placement of a light cure composite.