Sale!

Ammdent Lc Cal Excel

Original price was: ₹1,166.00.Current price is: ₹632.00.

Pickup from nearby metro station or get it home delivered

Check the list of all pickup points at metro stations

Features

  • High Resistance.

  • Excellent adhesion.

  • High Compressive Strength.

  • Very Stable.

  • Excellent Biocompatibility.

Description

Ammdent Lc Cal Excel is a light-curing radiopaque one-component calcium hydroxide material for cavity lining (base )for direct/Indirect pulp capping especially under Composites.

To prevent marginal leakage and infiltration of bacteria in the cervical/approximal margins, permanent isolation is recommended.

LC CALEXCEL can be directly applied to the tube. In the case of linings of more than 1mm apply and polymerize layer.

INDICATION : 

  • As a liner for indirect pulp capping.

  • As liner under all filling materials.

  • As protection against acid when applying the total-etch technique.

ADVANTAGES : 

  • Time-saving, direct application, and light-curing.

  • Ready to use one component material.

  • Acid Resistant.

  • Effective protection of the pulp.

  • It helps in the formation of secondary dentine.

  • Excellent adhesion to composites.

  • Low solubility in oral fluids.

  • Syringe type for easy delivery of the paste into the canal.

  • 2 Extra Tips for prevention of cross contamination.

  • Excellent antibacterial effect and radio-opacity.

  • Premixed Paste.

Caution

  • Store in a cool place and the cap always closed to prevent drying and phase separation of the material.

Contents

  • 1 x 2gm Syringe
  • 2 x Tips

Directions For Use

APPLICATION : 

  • The dental surfaces have to be dried thoroughly and contamination has to be avoided.

  • The preparation corresponds to the rules of the usual filling technique.

  • In direct proximity of the pulp, the application of an aqueous calcium hydroxide preparation is recommended. (CAL-EXCEL).

STEP 1:

  • Cure LC CAL EXCEL with halogen light.

STEP 2:

  • keep the light source as close as possible to the surface(approx1-2mm)and cure for at least 40-60 s.

STEP 3:

  • In case of more distance extend curing time.

STEP 4:

  • Carefully remove excess materials with a rotating instrument and apply the filling according to the manufacturer’s instructions.

STEP 5:

  • LC CALEXCEL adheres to materials,e.g.crown and bridge materials, temporary sealants on methacrylate basis, certain impression materials (e.g.polyether).

STEP 6:

  •  This could lead to the removal of the lining (core build-up).

STEP 7:

  • In such cases, it isrecommended to apply an isolating agent(e.g.vasline, glycerine gel or similar).

STEP 8:

  •  Remove isolating agent prior to definite application.

STEP 9 :

  • The consistency of LC CALEXCEL does not allow to remove excess material with a probe, this could eventually remove the whole linning (use a rotating instrument).

 STEP 10:

  •  After the use of LCEXCEL avoid direct light (operation lamp, sunlight)and apply the material immediately.

STEP 11:

  • LC CALEXCEL contains calcium hydroxide, TEGDMA, BHT, UDMA, and amine. Do not apply the material in the case of patients with known allergies against the ingredients.

 

 STEP 12:

  • Eugenol and other contaminations (e.g.thymol)prevent the polymerization, therefore avoid contact with these materials.

STEP 13:

  • Too short curing times and sufficient light intensity lead to incomplete curing, therefore check the halogen lamp/light guide regularly.

STEP 14:

  • Eugenol and other contaminations (e.g.thymol)prevent the polymerization, therefore avoid contact with these materials.

 STEP 15:

  • Too short curing times and sufficient light intensity lead to incomplete curing, therefore check the halogen lamp/light guide regularly.