Ammdent Lc Cal Excel

Features

High Resistance.

Excellent adhesion.

High Compressive Strength.

Very Stable.

Excellent Biocompatibility.

Description

Ammdent Lc Cal Excel is a light-curing radiopaque one-component calcium hydroxide material for cavity lining (base )for direct/Indirect pulp capping especially under Composites.

To prevent marginal leakage and infiltration of bacteria in the cervical/approximal margins, permanent isolation is recommended.

LC CALEXCEL can be directly applied to the tube. In the case of linings of more than 1mm apply and polymerize layer.

INDICATION :

As a liner for indirect pulp capping.

As liner under all filling materials.

As protection against acid when applying the total-etch technique.

ADVANTAGES :

Time-saving, direct application, and light-curing.

Ready to use one component material.

Acid Resistant.

Effective protection of the pulp.

It helps in the formation of secondary dentine.

Excellent adhesion to composites.

Low solubility in oral fluids.

Syringe type for easy delivery of the paste into the canal.

2 Extra Tips for prevention of cross contamination.

Excellent antibacterial effect and radio-opacity.

Premixed Paste.

Caution

Store in a cool place and the cap always closed to prevent drying and phase separation of the material.

1 x 2gm Syringe
2 x Tips

Directions For Use

APPLICATION :

The dental surfaces have to be dried thoroughly and contamination has to be avoided.

The preparation corresponds to the rules of the usual filling technique.

In direct proximity of the pulp, the application of an aqueous calcium hydroxide preparation is recommended. (CAL-EXCEL).

STEP 1:

Cure LC CAL EXCEL with halogen light.

STEP 2:

keep the light source as close as possible to the surface(approx1-2mm)and cure for at least 40-60 s.

STEP 3:

In case of more distance extend curing time.

STEP 4:

Carefully remove excess materials with a rotating instrument and apply the filling according to the manufacturer’s instructions.

STEP 5:

LC CALEXCEL adheres to materials,e.g.crown and bridge materials, temporary sealants on methacrylate basis, certain impression materials (e.g.polyether).

STEP 6:

This could lead to the removal of the lining (core build-up).

STEP 7:

In such cases, it isrecommended to apply an isolating agent(e.g.vasline, glycerine gel or similar).

STEP 8:

Remove isolating agent prior to definite application.

STEP 9 :

The consistency of LC CALEXCEL does not allow to remove excess material with a probe, this could eventually remove the whole linning (use a rotating instrument).

STEP 10:

After the use of LCEXCEL avoid direct light (operation lamp, sunlight)and apply the material immediately.

STEP 11:

LC CALEXCEL contains calcium hydroxide, TEGDMA, BHT, UDMA, and amine. Do not apply the material in the case of patients with known allergies against the ingredients.

STEP 12: