Gc Freegenol 1-1 Pkg

Features

Eugenol free, no negative effect on polymerization of resin containing materials
Short setting time
Consistency can be adjusted
Easy to remove from crowns and cores
Special cleaner included

Description

Freegenol is a eugenol-free luting cement for temporary cementation of indirect restorations.

It is completely compatible and safe to use with acrylic resin materials. Biocompatible with tooth structure and soft tissue, Freegenol is easy to use and mixes to a smooth, creamy consistency.

INDICATIONS

Cementation of temporary crowns and bridges.

ADVANTAGES

Eugenol-free formula

Will not burn or irritate soft tissue
Compatible with plastics
Will not ruin acrylics
Will not diminish adhesion of bonded restorations

Thixotropic

Stays where it is placed
Flows well under pressure
Mixes in 20-30 seconds
Sets hard in three minutes
Easy clean-up

Specifications

COMPOSITION

Components	%
Zinc oxide	70-75
Vegetable Oil	21-22
Petrolatum	3-5

Store at temperature of 4-25°C (39.2-77.0°F)
Mixing time: 20-30 seconds
Setting time: 3 minutes from the start of mixing

CONTRAINDICATIONS

In rare cases the product may cause sensitivity to some persons. If such reactions are experienced, discontinue the use of the product and refer to a physician.

CAUTIONS

In case of contact with eyes, flush immediately with water and seek medical attention

1 x 20ml Base
1 x 20ml Accelerator

Directions For Use

Step 1. Squeeze equal lengths of Base and Accelerator pastes onto the mixing pad.

Step 2. Mix thoroughly for 20-30 seconds.

Step 3. Insert paste into (temporary) crown or bridge and seat onto the prepared dry tooth.

Step 4. Allow to set (3 minutes from start of mixing) and trim excess.

NOTES

1. Setting time can be adjusted by using more or less Base (More Base-faster set ; less Base-slower set). Do not go outside Base / Accelerator ratio range 3 : 2 to 2 : 3).
2. If material sticks to tooth or metal, Vaseline may be added up to 25% of total mix.