Directions For Use

• Preparation of CLEARFIL PHOTO CORE
  Dispense the necessary amount of the composite onto the paper pad by rotating the paste syringe plunger.After dispensing the composite, turn the plunger counter-clockwise a half-turn to prevent excess composite from oozing out.
  Replace the syringe cap immediately to prevent premature setting of the composite.
• Placing CLEARFIL PHOTO CORE into the cavity
  Place the composite into the cavity preparation using hand instruments. It is recommended that transparent matrix strips be used to help form the core.
• Curing
  Cure the composite with a dental curing unit. Hold the emitting tip as close to the composite as possible. The light curing time and depth of cure for each dental curing unit is used is shown below.

Light curing time and depth of cure:

• Preparation of the abutment tooth
  After curing the composite resin, prepare the abutment tooth.